Influence of interphase layer on the overall elasto-plastic behaviors of HA/PEEK biocomposite.

A three-dimensional finite element unit cell model has been designed and constructed for studying mechanical properties of hydroxyapatite (HA) reinforced polyetheretherketone (PEEK) biocomposite. The model consists of an elastic-brittle HA spherical particle, an elasto-plastic matrix and an interphase layer between the particle and the matrix. The interphase layers with four different kinds of material behaviors have been taken into consideration to examine their effects on the overall properties of the composite. The damage evolution in the matrix and the interphase layer, and the interface failure, were also taken into account. Some other factors, such as mesh sensitivity, loading velocity and mass scale scheme, were also discussed in this investigation. A general-purpose finite element software package, ABAQUS, incorporated with a user-defined material subroutine, was used to perform the analysis. The predicted results were compared with the experimental data obtained from existing literatures. The results predicted by using the cell model with consideration of the matrix degradation and the effects of the damage and failure on the interphase layer are in good agreement with the experimental ones. Hence, the suitability of our proposed cell model incorporated with an appropriate type of the interphase layer for modeling the mechanical properties of the particulate biocomposite could be verified.

Copyright 2004 Elsevier Ltd.