Rheological properties of polyether polyurethane rubber based magnetorheological elastomers under transverse shear and vertical pressure.

A novel magnetorheological vibration isolator with two operating conditions, horizontal shear and vertical compression, was designed and manufactured. The rheological properties of the energy-dissipating material were directly related to the volume fraction of iron powder in the laminated working unit of the magnetorheological vibration isolator. Aggregation of the carbonyl iron powder (CIP) strongly influenced on the rheological properties of the magnetorheological vibration isolator. Considered that the curing temperature affected the preparation process, polyurethane rubber was selected as the collective matrix of the magnetorheological elastomer (MRE) because of its wear resistance, good adhesion, high strength, corrosion resistance and solvent resistance. The dynamic properties of the polyurethane rubber MREs were experimentally characterised. A mathematical model was established for the magnetic induction effect (MIE) of the polyurethane magnetorheological isolator in a transverse shear deformation mode as well as a vertical tension and compression deformation mode. The magnetorheological effect was strongest under transverse shear deformation for an effective volume fraction of particles of 34% because of the effect of aggregation of the iron powder particles. The magnetic compression modulus depended strongly on the strain under vertical compression.

Copyright: © 2024 Li et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.