Mathematical modelling, multi-objective optimization, and compliance reliability of paper-derived eco-composites.

The quest for cost-effective and thermal efficient structural materials onto beating the high cost of construction is gaining more attention among researchers. This study focused on the blending of cement and sand with waste paper pulp into cost-effective structural materials. The composites were prepared in four mix groups with each containing a fixed amount of sand at 5, 10, 15, and 20 wt.% (by weight of pulp). Cement was varied at 10, 20, 30, and 40 wt.% in each group, and curing was done for 28 days. Properties evaluated are compressive, bending, and splitting strengths. It was observed that increasing cement and sand contents enhanced strengths; howbeit, the blend of 30 wt.% cement/15 wt.% sand resulted in a reduction in bending strength even as 30 wt.% cement/20 wt.% sand engendered a decrease in bending and splitting strength. The microstructural features showed that inherent fibers of the pulp were well bonded with hydration products and sand content yielding good performance in the composites. The optimization procedure carried out depicted a combination of 35.27% cement and 20% sand as the optimum composition. Experimental outcomes were modelled for the purpose of prediction of responses. The models were confirmed statistically fit showing how varying cement content affected strength responses at fixed sand proportion. ANOVA affirmed the significant contribution of cement and sand on the strength responses. Compliance reliability was observed to be dependent on the interactive pattern between cement and sand. Going by the standard prescription for the strength properties, cement and sand content of 35.27 and sand 20 wt.% satisfied all strength requirements for low-cost construction having a compliance reliability of 1.31.

© 2022. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.