Removal of Bromocresol Green from aqueous solution by electro-Fenton and electro-Fenton-like processes with different catalysts: laboratory and kinetic model investigation.

This study presents the removal of triarylmethane dye Bromocresol Green from aqueous solution by the electro-Fenton process. As catalysts five different cations were used: Fe, Ce, Ni, Mn, and Co. They play crucial roles in the whole process because they react with HO producing hydroxyl radicals that are capable of breaking down dye molecules. Based on this, a comparison of catalytic activity of these cations in the electro-Fenton process is made for Bromocresol Green degradation. A simple and universal kinetic model is also applied to study the catalytic activity of investigated catalysts. Due to its multidimensionality it is fitted to experimental data using a genetic algorithm. The procedure of fitting using a genetic algorithm is thoroughly described and demonstrated. The activity of utilized catalysts is compared based on both experimental and model data revealing that for Bromocresol Green removal all alternative catalysts (Ni, Co, Ce, Mn) are better than the typical one (Fe, 51.83% degradation). The best catalyst is Co with 78.35% degradation efficiency. Moreover, the adopted kinetic model proved its universality and outlined different interactions between catalysts and dye molecules.