Voltammetric measurement of entacapone in the presence of other medicines against Parkinson's disease by a screen-printed electrode modified with sulfur-tin oxide nanoparticles.

A screen-printed electrode (SPE) is described modified with sulfur-tin oxide nanoparticles (S@SnONP) for the determination of entacapone (ENT) in the presence of other medicines against Parkinson's disease (PD). The S@SnONP was synthesized through the hydrothermal method and used in the modification of the SPE. The smart utilization of the S@SnONP and the SPE provided excellent properties such as high surface area and current density amplification by embedding an efficient sensing interface for highly selective electrochemical measurement. Under optimized experimental conditions, the anodic peak current related to the ENT oxidation onto the sensor surface at 0.46 V presented a linear response towards different ENT concentration sin the range 100 nM to 75 μM. The limit of detection (LOD) and electrochemical sensitivity were estimated to be 0.010 μM and 2.27 μA·μM·cm, respectively. The applicability of the sensor was evaluated during ENT determination in the presence of other conventional medicines againts, including levodopa (LD), carbidopa (CD), and pramipexole (PPX). The results of the analysis of human urine and pharmaceutical formulation as real samples using the developed sensor were in good agreement withre sults of high-performance liquid chromatography (HPLC) as a standard method. These findings demonstrated that the strategy based on the SPE is a cost-effective platform creating a promising candidate for practical determination of ENT in routine clinical testing.Graphical abstract.