Ruidong Zhao, Jianguang Qin, Tianju Chen, Leilei Wang, Jinhu Wu
Journal: Waste management (New York, N.Y.) 2020;116():91-99
PMID: 32799100
Co-combustion was proposed as an effective and complementary means for the co-treatment of low rank coal semicoke (LRCS) and oil sludge. The combustion, kinetics and gaseous pollutants emission characteristics during co-combustion of LRCS and oil sludge were investigated by thermogravimetric analyzer coupled with Fourier transform infrared spectrometer (TG-FTIR). Results showed oil sludge had more complex weight loss characteristics than LRCS. Proper addition of oil sludge could effectively improve the ignition, burnout and comprehensive combustion performance of blends and 60% was a recommended oil sludge blend ratio. High heating rates could also enhance the combustion performance of blends. The activation energy determined by Coats-Redfern method gradually decreased with the increase of oil sludge blend ratio. DAEM kinetic analysis results showed the maximum activation energy of 113.4 kJ/mol was obtained when conversion rate was 0.4 due to the poor ignition performance of LRCS. All of the CO, CO, NOx and SO emission gradually decreased with the increasing oil sludge blend ratio. LRCS had suppression effect on NOx emission during co-combustion while oil sludge was just the opposite. The low sulfur release rate of oil sludge resulted in the decreasing SO emission of blends although oil sludge had promotion effect on SO emission.
Copyright © 2020 Elsevier Ltd. All rights reserved.
Miscellaneous:
Full Text Sources:
© Copyright 2026, Nutrition Evidence
We use cookies to improve your experience and analyze site traffic with Google Analytics. By continuing to use our site, you agree to our use of cookies. Learn more.