The disinfection of impression materials by using microwave irradiation and hydrogen peroxide.

STATEMENT OF PROBLEM

Microwave irradiation and immersion in solutions have been recommended for denture disinfection. However, the effect of dry conditions and impression materials has not been completely evaluated.

PURPOSE

The purpose of this study was to evaluate the effectiveness of microwave irradiation and hydrogen peroxide for the disinfection of dental impression materials.

MATERIAL AND METHODS

Specimens (diameter 10 mm, thickness 2 mm) were made with polyvinyl siloxane. Experimental groups were treated with hydrogen peroxide (group H), microwave irradiation (group M), and a combination of both hydrogen peroxide and microwave irradiation (group MH) for 1 minute, 2 minutes, and 3 minutes. The control group was untreated. The total sample size was 120. The specimens were divided into 2 groups, those exposed to Streptococcus mutans and those exposed to Escherichia coli. The disinfection effect and physical properties (contact angle, compatibility with gypsum, strain in compression, tear strength) were evaluated.

RESULTS

All 3 groups (H, M, MH) were effective in reducing the number of colony forming units (CFU) per unit volume (mL) for both S mutans and E coli compared with the control. The most significant reduction in the CFU/mL of both bacteria was noted in the MH group and was used to compare either treatment alone (P<.05). No statistically significant difference was noted between the control and treatment groups in terms of all of the physical properties tested (P>.05).

CONCLUSIONS

Microwave irradiation was identified as a useful disinfection method against S mutans and E coli, especially when combined with H2O2, without adversely affecting the physical properties of dental impression materials.

Copyright © 2014 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.