Influence of instrumentation techniques and irrigating solutions on bond strength of glass fiber posts to root dentin.

This study sought to evaluate how instrumentation techniques and irrigating solutions affected the bond strength of glass fiber posts. For this study, 80 human maxillary central incisors were selected. Endodontic access was obtained, root canal length was measured, and the coronal third was prepared using Gates-Glidden drills. The specimens were embedded in acrylic resin and randomly assigned to 8 groups (n = 10): manual instrumentation only (Group 1), rotary instrumentation only (Group 2), irrigation with 2.5% sodium hypochlorite (NaOCl) (Group 3), irrigation with 2% chlorhexidine (CHX) (Group 4), manual instrumentation and irrigation with 2.5% NaOCl (Group 5), manual instrumentation and irrigation with 2% CHX (Group 6), rotary instrumentation and irrigation with 2.5% NaOCl (Group 7), and rotary instrumentation and irrigation with 2% CHX (Group 8). Specimens in Groups 5-8 also received a 1 minute final rinse with ethylenediaminetetraacetic acid. Canals were filled and the specimens stored for 30 days in distilled water. The restoration material was removed down to the apical 4 mm of the root canal. The glass fiber posts were luted with resin cement and stored for 24 hours at 37°C. Specimens were subjected to a tensile strength test at a constant speed of 1.0 mm/minute and a load of 2,000 kgf. The results were analyzed by analysis of variance and Tukey's test. Irrigation with 2.5% NaOCl reduced the bond strength of fiber posts significantly (P < 0.01), while CHX showed no effect (P > 0.05). It was concluded that irrigation with 2.5% NaOCl has a negative effect on micromechanical retention of glass fiber posts, whether manual or rotary instrumentation is used.