Influence of convection on small molecule clearances in online hemodiafiltration.

A Ficheux, A Argilés, H Mion, C M Mion

Journal: Kidney international 2000;57(4):1755-63

PMID: 10760112

Abstract

BACKGROUND

Dialysis efficacy is mostly influenced by dialyzer clearance. Urea clearance may be estimated in vitro by total ion clearance, which can be obtained by conductivity measurements. We have previously used this approach to assess in vitro clearances in a system mimicking predilutional and postdilutional online hemodiafiltration with a wide range of QD, QB, and ultrafiltration rates. Our current study elaborates on a formula that allows the prediction of the influence of ultrafiltration on small molecule clearances, and validates the mathematical approach both experimentally in vitro and clinically in vivo data.

METHODS

Two conductivimeters in the dialysate side of an E-2008 Fresenius machine were used. HF80 and HF40 polysulfone dialyzers were used; reverse osmosis water and dialysate were used for blood and dialysate compartments, respectively. Study conditions included QB of 300 and 400 mL/min and QD of 500 and 590 mL/min, with a range of ultrafiltration rate from 0 to 400 mL/min in postdilutional hemodiafiltration and to 590 mL/min in predilutional hemodiafiltration. Urea clearances were determined in the in vivo studies, which included 0, 50, 100, and 150 mL/min ultrafiltration rates.

RESULTS

The ultrafiltration rate and clearance were significantly correlated (R > 0.9, P < 0.001) and fitted a linear model (P < 0.001) in all of the experimental conditions. The following formula fitted the experimental points with an error <2% for both postdilutional and predilutional online diafiltration in vitro, respectively. K = K0 + [(QB - K0)/(QB)] x ultrafiltration rateK = K0 + [((QD x QB)/(QB + QD) - K0)/QD] x ultrafiltration rate where K is the clearance; K0 is the clearance with nil ultrafiltration rate; QD is the total dialysate produced (in commercial HDF, QD = QDi + Qinf). Since weight loss was maintained at 0, ultrafiltration rate = infusion flow. QB is the "blood" line flow. The formula was also verified in vivo in clinical postdilutional hemodiafiltration with a QB taking into account the cellular and water compartments.

DISCUSSION

In vitro, by simply determining the clearance in conventional dialysis, the total clearance for any ultrafiltration rate may be estimated in both predilutional and postdilutional online diafiltration with an error of less than 2%. The same applies to in vivo postdilutional hemodiafiltration when the formula takes into account the cellular and water composition of blood.

Address: UDSA-AIDER, Service de Biochimie B, Centre Hospitalier Universitaire "St Eloi," and Institut de Génétique Humaine(IGH)-UPR 1142 CNRS, Montpellier, France.

Link outs

Bant logo

© Copyright 2026, Nutrition Evidence

NED wishes to thank the following organisations for their support:

We use cookies to improve your experience and analyze site traffic with Google Analytics. By continuing to use our site, you agree to our use of cookies. Learn more.