Properties and water sorption characteristics of spaghetti prepared using various dies.

Spaghetti was prepared using dies made of different materials. The surface was observed using digital and optical microscopes, and was rougher for the spaghettis prepared using the Teflon, polypropylene, polycarbonate, aluminum, and bronze dies in this order. The extrusion velocity when passing through the die was faster, the bulk density was higher, and the rupture strength was greater for the spaghetti having the smoother surface. The die material did not affect the gelatinization temperature. The water sorption curves in boiling water containing 0.5% (w/v) sodium chloride were also observed. The curves were expressed by an equation of the hyperbolic type except for the early stage of sorption in order to estimate the equilibrium amount of water sorbed based on the bone-dry sample. The momentarily-sorbed amount of water, which is a hypothetical quantity to characterize the initial water intake, was estimated by fitting the experimental points within 60 s. The amount was higher for the spaghetti having the rougher surface.

© 2013 Institute of Food Technologists®