Hee-Jeong Choi, Seung-Mok Lee, Chul-Ho Choi, Min-Chul Kwon, Hyeon-Yong Lee
Journal: Journal of hazardous materials 2009;158(1):151-6
PMID: 18329170
The effect of acetate was examined during the p-removal and denitrification of wastewater. The plant was operated based on the sequencing-batch-biofilm-reactor (SBBR) process. As microbial media, ca. 9 mm Bio-Flow granules made from polyethylene and polypropylene were used. Three preparations were made to compare the level of biological p-removal and denitrification. In comparison to the batch test, 42 mg/L (AC 30) and 84 mg/L (AC 60) of NaCH(3)COO were mixed with the 500 mL of raw wastewater and the effect of the acetate concentration on the level of p-removal was monitored. All samples were immediately filtered with 0.45 microm membrane filter, and PO(4)-P, NO(3)-N, NO(2)-N and acetate were analyzed using Ion Chromatography, whereas P(total) and chemical oxygen demand (COD) were measured by a spectrophotometer. The p-removals for the WW, WW+AC 30 and WW+AC 60 preparations were found to be 9.4, 9.1 and 13.1mg/L, respectively. The WW+AC 30 preparation did not show any significant effect on the p-removal, while p-removal in WW+AC 60 preparation was higher than that in the other two preparations. A comparison of the data revealed the COD: NO(3)-N:AC:P ratio of the WW, WW+AC 30 and WW+AC 60 preparations to be 18.07:2.90:6.87:1, 21.28:2.45:5.98:1 and 15.95:2.75:6.18:1, respectively. The experimental results showed that approximately 7 mg/L of acetate was consumed per 1mg/L of p-removal.
Research Materials:
Full Text Sources:
© Copyright 2026, Nutrition Evidence
We use cookies to improve your experience and analyze site traffic with Google Analytics. By continuing to use our site, you agree to our use of cookies. Learn more.