-
1.
Feraheme® suppresses immune function of human T lymphocytes through mitochondrial damage and mitoROS production.
Shah, A, Mankus, CI, Vermilya, AM, Soheilian, F, Clogston, JD, Dobrovolskaia, MA
Toxicology and applied pharmacology. 2018;:52-63
Abstract
Despite attractive properties for both therapeutic and diagnostic applications, the clinical use of iron oxide nanoparticles (IONPs) is limited to iron replacement in severely anemic patient populations. While several studies have reported about the immunotoxicity of IONPs, the mechanisms of this toxicity are mostly unknown. We conducted a mechanistic investigation using an injectable form of IONP, Feraheme®. In the cultures of primary human T cells, Feraheme induced miotochondrial oxidative stress and resulted in changes in mitochondrial dynamics, architecture, and membrane potential. These molecular events were responsible for the decrease in cytokine production and proliferation of mitogen-activated T cells. The induction of mitoROS by T cells in response to Feraheme was insufficient to induce total redox imbalance at the cellular level. Consequently, we resolved this toxicity by the addition of the mitochondria-specific antioxidant MitoTEMPO. We further used these findings to develop an experimental framework consisting of critical assays that can be used to estimate IONP immunotoxicity. We explored this framework using several immortalized T-cell lines and found that none of them recapitulate the toxicity observed in the primary cells. Next, we compared the immunotoxicity of Feraheme to that of other FDA-approved iron-containing complex drug formulations and found that the mitochondrial damage and the resulting suppression of T-cell function are specific to Feraheme. The framework, therefore, can be used for comparing the immunotoxicity of Feraheme with that of its generic versions, while other iron-based complex drugs require case-specific mechanistic investigation.
-
2.
A human endogenous protein exerts multi-role biomimetic chemistry in synthesis of paramagnetic gold nanostructures for tumor bimodal imaging.
Yang, W, Wu, X, Dou, Y, Chang, J, Xiang, C, Yu, J, Wang, J, Wang, X, Zhang, B
Biomaterials. 2018;:256-269
Abstract
Protein-mediated biomimetic nanoparticles because of simplicity of their synthesis, subdued nonspecific adsorption, improved pharmacokinetics, and biocompatibility have been receiving increasing attention recently. Nevertheless, only a handful of proteins have been developed for biomimetic synthesis. Worse still, most of them are constrained on single-function usages in chemistry. Exploring new functional proteins, especially those with multi-dentate moieties for multi-role biomimetic chemistry, still remains a substantial challenge. Here, we report on a human endogenous protein, glutathione S-transferase (GST), with favorable amino acid motifs, that has innate talents in incubating high quality gold nanoparticles without adding reducing agents at physiological temperature, and particularly can further anchor gadolinium ions without adding extra chelators. The resultant paramagnetic AuNPs@GSTGd exhibits highly crystallization and uniform size of ca. 10 nm. Compared with clinical contrast agents (Iopamidol, Magnevist), AuNPs@GSTGd shows better imaging performance (e.g. enhanced relaxivity and larger X-ray attenuation efficiency) with clear evidence from Monte Carlo simulation and in vitro experimental results. Further in vivo imaging demonstrates good tumor targeting and clearance of AuNPs@GSTGd without obvious systemic toxicity. Particularly, low immunogenicity of AuNPs@GSTGd is certified by immunological status evaluation of T cells after stimulated with them. This study for the first time demonstrates the manipulation of a human protein for multi-role biomimetic chemistry depending on its unique amino acid motifs and its incorporation into a synthetic agent for potentially addressing some critical issues in cancer nanotheranostics such as synthetic methodology, biocompatibility, function integration, targeting, and immunogenicity.
-
3.
Antibacterial properties and compressive strength of new one-step preparation silver nanoparticles in glass ionomer cements (NanoAg-GIC).
Paiva, L, Fidalgo, TKS, da Costa, LP, Maia, LC, Balan, L, Anselme, K, Ploux, L, Thiré, RMSM
Journal of dentistry. 2018;:102-109
Abstract
OBJECTIVES This work aimed (1) to develop polyacid formulations by the one-step photoreduction of silver nanoparticles (AgNP) in a polyacrylate solution of conventional glass ionomer cement (GIC), imparting antibacterial activity; and (2) to evaluate handling and mechanical properties of experimental ionomers in comparison to a commercially available conventional GIC. METHODS Formulations with increasing sub-stoichiometric amounts of AgNO3 were monitored during continuous UV light exposure by UV-vis spectroscopy and analyzed by transmission electron microscopy. The resulted synthesis of formulations containing small and disperse spherical nanoparticles (∼6 nm) were used to design the experimental nano-silver glass ionomer cements (NanoAg-GIC). The cements were characterized as to net setting time and compressive strength according to ISO 9917-1:2007 specifications. The antibacterial activity of these cements was assessed by Ag+ diffusion tests on nutritive agar plates (E. coli) and by MTT assay (S. mutans). RESULTS The higher concentration of silver (0.50% by mass) in the matrix of NanoAg-GIC allowed viable net setting time and increased in 32% compressive strength of the experimental cement. All groups containing AgNP induced statistically significant E. coli growth inhibition zones (p-value <.05), indicating diffusion of Ag+ ions on the material surroundings. Metabolic activity of S. mutans grown on NanoAg-GIG with higher concentration of silver was significantly affected compared to control (p-value <.01). CONCLUSIONS Silver nanoparticles one-step preparation in polyacrylate solution allowed the production of highly bioactive water-based cements within suitable parameters for clinical use and with large potential of dental and biomedical application.
-
4.
Selection of Optimum Strategies for the Fabrication of Plant-Mediated Metal Nanoparticles: Emerging Problems in Sustainability.
Din, MI, Rani, A
Critical reviews in analytical chemistry. 2018;(5):406-415
Abstract
The green fabrication of nanoparticles (NPs) by using plants as reducing and capping agents involves energy efficient, less toxic, safer and simpler pathways. These pathways have been related to the rational use of numerous substances in fabrication of NPs and synthetic strategies, which have been mainly discussed in this article. The subject matter of this review is to discuss how a chemist can follow the green chemistry principles in terms of selection of substances and protocols used for NPs fabrication. Furthermore, it describes how a researcher can modify the physical properties of NPs by varying the reaction conditions. In short, this review article provides a scheme for the synthesis of NPs from selection of suitable plant to characterization of formed NPs by employing green chemistry.
-
5.
A review on bio-synthesized zinc oxide nanoparticles using plant extracts as reductants and stabilizing agents.
Basnet, P, Inakhunbi Chanu, T, Samanta, D, Chatterjee, S
Journal of photochemistry and photobiology. B, Biology. 2018;:201-221
Abstract
In the age of technology, nanoparticles have proven to be one of the essential needs for development. These nanoparticles have the potential to be used for a wide variety of applications, thereby, development in improving the quality of nanoparticles, to make them more application specific, is still under research. In this regard, an important point to note is that the procedures employed in synthesizing nanoparticles require to be cost-effective and less-steps involved and have an additional advantage, i.e. they should be eco-friendly. This means that the synthesis procedure needs avoiding the use of harmful chemicals, and negligible generation of any noxious by-products. The green synthesis (biosynthesis) method employs simple procedures, easily available raw materials and ambiance for the synthesis process, where the precursors used are safe, with minute possibility for the production of harmful by-products. Considering these advantages, the current review includes a brief description on the various chemical and physical synthesis method of zinc oxide (ZnO) nanoparticles with emphasis on the biosynthesis of ZnO nanoparticles using plant extracts (and briefly microbes), the phytochemicals present in the plant extracts, the plausible mechanisms involved in the formation of ZnO nanoparticles and applications of the as-synthesized ZnO nanoparticles as photocatalysts and microbial inhibitors.
-
6.
Silver nanoparticle modulates gene expressions, glyoxalase system and oxidative stress markers in fluoride stressed Cajanus cajan L.
Yadu, B, Chandrakar, V, Korram, J, Satnami, ML, Kumar, M, S, K
Journal of hazardous materials. 2018;:44-52
Abstract
Application of engineered nanomaterials has increased these days due to their beneficial impacts on several sectors of the economy, including agriculture. Silver nanoparticles (AgNP) are commonly used to improve rate of seed germination, and growth and development of plants. The present study was aimed to monitor the role of engineered AgNP (non-dialysed) in the amelioration of fluoride (F)-induced oxidative injuries in Cajanus cajan L. Experimental results revealed that F-exposure inhibited growth and membrane stability index, while were enhanced with the augmentation of AgNP. The results also demonstrated that F treatment enhanced the accumulations of reactive oxygen species, malondialdehyde and oxidized glutathione, gene expression of NADPH oxidase, and activity of lipoxygenase, but were decreased by the addition of AgNP. The results indicated that exogenous application of AgNP provided tolerance against F-toxicity via enhancing the levels of proline, total and reduced glutathione, glyoxalase I and II activities, and expression of pyrroline-5-carboxylate synthetase gene. Conducted study uniquely suggested potential role of AgNP in the remediation of F-toxicity, at least in the Cajanus cajan L. radicles. Further research would be intended to unravel the molecular mechanism(s) involved precisely in the AgNP mediated alleviation of F-toxicity.
-
7.
Optimised synthesis of ZnO-nano-fertiliser through green chemistry: boosted growth dynamics of economically important L. esculentum.
Jabeen, N, Maqbool, Q, Bibi, T, Nazar, M, Hussain, SZ, Hussain, T, Jan, T, Ahmad, I, Maaza, M, Anwaar, S
IET nanobiotechnology. 2018;(4):405-411
-
-
Free full text
-
Abstract
Mounting-up economic losses to annual crops yield due to micronutrient deficiency, fertiliser inefficiency and increasing microbial invasions (e.g. Xanthomonas cempestri attack on tomatoes) are needed to be solved via nano-biotechnology. So keeping this in view, the authors' current study presents the new horizon in the field of nano-fertiliser with highly nutritive and preservative effect of green fabricated zinc oxide-nanostructures (ZnO-NSs) during Lycopersicum esculentum (tomato) growth dynamics. ZnO-NS prepared via green chemistry possesses highly homogenous crystalline structures well-characterised through ultraviolet and visible spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscope. The ZnO-NS average size was found as small as 18 nm having a crystallite size of 5 nm. L. esculentum were grown in different concentrations of ZnO-NS to examine the different morphological parameters includes time of seed germination, germination percentage, the number of plant leaves, the height of the plant, average number of branches, days count for flowering and fruiting time period along with fruit quantity. Promising results clearly predict that bio-fabricated ZnO-NS at optimum concentration resulted as growth booster and dramatically triggered the plant yield.
-
8.
Metallic nanoparticles influence the structure and function of the photosynthetic apparatus in plants.
Tighe-Neira, R, Carmora, E, Recio, G, Nunes-Nesi, A, Reyes-Diaz, M, Alberdi, M, Rengel, Z, Inostroza-Blancheteau, C
Plant physiology and biochemistry : PPB. 2018;:408-417
Abstract
The applications of nanoparticles continue to expand into areas as diverse as medicine, bioremediation, cosmetics, pharmacology and various industries, including agri-food production. The widespread use of nanoparticles has generated concerns given the impact these nanoparticles - mostly metal-based such as CuO, Ag, Au, CeO2, TiO2, ZnO, Co, and Pt - could be having on plants. Some of the most studied variables are plant growth, development, production of biomass, and ultimately oxidative stress and photosynthesis. A systematic appraisal of information about the impact of nanoparticles on these processes is needed to enhance our understanding of the effects of metallic nanoparticles and oxides on the structure and function on the plant photosynthetic apparatus. Most nanoparticles studied, especially CuO and Ag, had a detrimental impact on the structure and function of the photosynthetic apparatus. Nanoparticles led to a decrease in concentration of photosynthetic pigments, especially chlorophyll, and disruption of grana and other malformations in chloroplasts. Regarding the functions of the photosynthetic apparatus, nanoparticles were associated with a decrease in the photosynthetic efficiency of photosystem II and decreased net photosynthesis. However, CeO2 and TiO2 nanoparticles may have a positive effect on photosynthetic efficiency, mainly due to an increase in electron flow between the photosystems II and I in the Hill reaction, as well as an increase in Rubisco activity in the Calvin and Benson cycle. Nevertheless, the underlying mechanisms are poorly understood. The future mechanistic work needs to be aimed at characterizing the enhancing effect of nanoparticles on the active generation of ATP and NADPH, carbon fixation and its incorporation into primary molecules such as photo-assimilates.
-
9.
Comparative study of cyto- and genotoxic potential with mechanistic insights of tungsten oxide nano- and microparticles in lung carcinoma cells.
Chinde, S, Poornachandra, Y, Panyala, A, Kumari, SI, Yerramsetty, S, Adicherla, H, Grover, P
Journal of applied toxicology : JAT. 2018;(6):896-913
Abstract
The exigency of semiconductor and super capacitor tungsten oxide nanoparticles (WO3 NPs) is increasing in various sectors. However, limited information on their toxicity and biological interactions are available. Hence, we explored the underlying mechanisms of toxicity induced by WO3 NPs and their microparticles (MPs) using different concentrations (0-300 μg ml-1 ) in human lung carcinoma (A549) cells. The mean size of WO3 NPs and MPs by transmission electron microscopy was 53.84 nm and 3.88 μm, respectively. WO3 NPs induced reduction in cell viability, membrane damage and the degree of induction was size- and dose-dependent. There was a significant increase in the percentage tail DNA and micronuclei formation at 200 and 300 μg ml-1 after 24 hours of exposure. The DNA damage induced by WO3 NPs could be attributed to increased oxidative stress and inflammation through reactive oxygen species generation, which correlated with the depletion of reduced glutathione content, catalase and an increase in malondialdehyde levels. Cellular uptake studies unveiled that both the particles were attached/surrounded to the cell membrane according to their size. In addition, NP inhibited the progression of the cell cycle in the G2 /M phase. Other studies such as caspase-9 and -3 and Annexin-V-fluorescein isothiocyanate revealed that NPs induced intrinsic apoptotic cell death at 200 and 300 μg ml-1 concentrations. However, in comparison to NPs, WO3 MPs did not incite any toxic effects at the tested concentrations. Under these experimental conditions, the no-observed-significant-effect level of WO3 NPs was determined to be ≤200 μg ml-1 in A549 cells.
-
10.
Phytosynthesis of gold nanoparticles: Characterization, biocompatibility, and evaluation of its osteoinductive potential for application in implant dentistry.
Jadhav, K, Hr, R, Deshpande, S, Jagwani, S, Dhamecha, D, Jalalpure, S, Subburayan, K, Baheti, D
Materials science & engineering. C, Materials for biological applications. 2018;:664-670
Abstract
Gold nanoparticles have been extensively used in diagnostics, biomedical imaging, and drug delivery owing to simple method of synthesis and versatile surface functionalization. Present investigation aims to evaluate the osteoinductive property of Salacia chinensis (SC) mediated gold nanoparticles (GNPs) for its application in implant dentistry. The formation of GNPs was assessed initially using the visual method and characterized analytically by using UV-visible spectroscopy, Zetasizer, X-RD, ICP-AES, AFM, and TEM. Green synthesized GNPs exhibited a remarkable stability in various blood components (0.2 M histidine, 0.2 M cysteine 2% bovine serum albumin, and 2% human serum albumin) and were found to be nontoxic when evaluated for their cytocompatibility and blood compatibility using periodontal fibroblasts and erythrocytes respectively. Exposure of GNPs to MG-63 cell lines displayed increased percent cell viability (138 ± 27.4) compared to the control group (96 ± 3.7) which confirms its osteoinductive potential. Herein, it can be concluded that the stable, biocompatible and eco-friendly GNPs can be used as an effective bone inductive agent during dental implant therapy.